Belkin is not obligated to provide any maintenance or support for the Open Source Software or any Product Software that has been modified by you pursuant to an Open Source Software license. Open source licenses are generally licenses that make source code available for free modification and distribution, but can also apply to technology received and distributed solely in object code form.
All title and intellectual property rights including without limitation all copyrights, patents, trade secret rights and trademark rights in and to the Software including but not limited to any content incorporated into the Software , the accompanying printed materials, and any copies of the Software, are owned by Belkin or its suppliers. Therefore, you must treat the Software like any other material protected by laws and treaties relating to international property rights and in accordance with this Agreement.
These features are provided solely as a convenience to you. You will need to make your own independent judgment regarding your interaction with these Linked Sites. You hereby waive and release any legal claim you might have against Belkin with respect to these sites or third-party products or services, and your use of these sites, third-party products or services. We encourage you to read the terms and conditions and privacy policy of each third party website that you choose to visit.
If Belkin is the subject of a claim, becomes involved in a legal proceeding, or suffers any economic loss or damage as a result of your violation of this Agreement, to the extent permitted by law, you will be responsible for compensating Belkin for the full amount of its loss, as well as any reasonable amounts Belkin incurs in lawyers' fees, expenses and court costs, except to the extent that Belkin contributed to the loss or damage.
Once accepted, this Agreement remains in effect until terminated. The limited license in this Agreement will be automatically terminated if you fail to comply with any of the terms and conditions in this Agreement. You agree that upon such termination, you will immediately destroy all programs and documentation that relate to the Software, including all copies made or obtained by you, and otherwise cease use of the Software.
If the Software has been installed on a personal computer or mobile device, you must uninstall the Software immediately. If the Software is software or firmware embedded on a Product, you must stop using the Product. All provisions of this Agreement except for Section 1 and the limited warranty in Section 12 the first paragraph will survive termination.
In addition to these remedies a "consumer" within the meaning of the CGA may claim for any reasonably foreseeable loss other than loss or damage through reduction of value of the goods that results from the initial problem.
To make a claim under this Limited Warranty, return the defective media along with the sales receipt directly to Belkin at the following address: Belkin International, Inc. This Limited Warranty is void if failure of the media has resulted from accident, abuse, or misapplication. Any replacement media will be warranted for the remainder of the original Warranty Period or thirty 30 days, whichever is longer.
In relation to consumers who are entitled to the benefit of the CGA, the media on which Software is provided comes with guarantees that cannot be excluded under New Zealand law, and this Limited Warranty is in addition to any statutory rights such consumers may have under New Zealand law.
This Limited Warranty does not apply in Australia. Consumers in Australia have statutory rights in relation to the Software and media on which the Software is provided under the Australian Consumer Law. To the extent warranties cannot be disclaimed or excluded, they are limited to the duration of the relevant Warranty Period. It is your responsibility to back up your system, including without limitation, any material, information or data that you may use or possess in connection with the Product or Software, and Belkin shall have no liability for your failure to back up your system or any material, information or data.
Some Belkin Products and Software may monitor energy consumption in the home. Belkin does not guarantee or promise any specific level of energy savings or other monetary benefit from the use of the Products or Software or any other feature. From time to time, Belkin may use the Software to provide you with information that is unique to you and your energy usage and suggests an opportunity to save money on energy bills if you adopt suggestions or features of the Product or Software.
You acknowledge that this information is not a guarantee of actual savings, and you agree not to seek monetary or other remedies from Belkin if your savings differs. We cannot guarantee that it is correct or up to date. In cases where it is critical, accessing information through the Software is not a substitute for direct access of the information in the home. The warranties and remedies set out in this Agreement are exclusive, and, to the extent permitted by law, in lieu of all others oral or written, express or implied.
You agree to strictly comply with all export control laws and regulations and agree not to export, re-export, divert, transfer or disclose any portion of the Software or any related technical information or materials, directly or indirectly, in violation of any applicable export law or regulation.
All U. Government users acquire the Software and user documentation with only those rights herein that apply to non-governmental customers. Use of either the Software or user documentation or both constitutes agreement by the U.
If any portion of this Agreement or any of its terms is found to be void or unenforceable by law in a particular jurisdiction, such portion or terms shall be interpreted and enforced to the maximum extent allowed in such jurisdiction, and the remaining provisions or any part thereof will remain in full force and effect.
This Agreement constitutes the entire agreement between Belkin and you with respect to the Software and your use thereof and supersedes any conflicting or additional terms contained in any purchase order or elsewhere. No provision of this Agreement may be waived, modified or superseded except by a written instrument accepted by Belkin and you.
However, the Belkin Privacy Policy referenced herein is subject to change in the manner described in that document. Belkin may provide translations of this Agreement as a convenience to users. However, in the event of a conflict or inconsistency between the English and any non-English versions, the English version of this Agreement shall govern, to the extent not prohibited by local law in your jurisdiction.
Any suppliers of Belkin shall be direct and intended third-party beneficiaries of this Agreement, including without limitation with respect to the disclaimers of warranties and limitations on liability set forth herein. Other than as set forth in the preceding sentence, a person or entity who is not a party to this Agreement shall not have any right to enforce any term of this Agreement. No failure or delay in exercising any right or remedy shall operate as a waiver of any such or any other right or remedy.
The language of this Agreement shall not be construed strictly for or against either party, regardless of who drafted such language or was principally responsible for drafting it. The rights and obligations under this Agreement are not assignable by you, and any attempted assignment shall be void and without effect. This Agreement shall bind and inure to the benefit of the parties and their successors and permitted assigns. If you are located outside of the United States, or if Section 17 does not apply to you or is otherwise unenforceable as adjudicated by a court of competent jurisdiction, then Section 18 applies to you:.
Any action arising out of or relating to this Agreement may be brought exclusively in the appropriate state or federal court in Los Angeles, California, and Belkin and you irrevocably consent to the jurisdiction of such courts and venue in Los Angeles, California. However, if you are a consumer and you live in a country where Belkin markets or distributes the Software, local law may require that certain consumer protection laws of your country of residence apply to some sections of this Agreement.
This address can be changed if needed. The IP address you choose should be a non-routable IP. You can choose to enter a network manually by typing the name here, or use the Site Survey to automatically identify the wireless networks within range of the Adapter to which to connect. This is a unique, advanced feature of your Belkin Router. It is possible to change the subnet mask if necessary; however, DO NOT make changes to the subnet mask unless you have a specific reason to do so.
This section is intended for the home, home-office, and small-office user. WEP was designed to give wireless networks the equivalent level of privacy protection as a comparable wired network. Some hardware manufacturers refer to bit as bit encryption.
Most of the new wireless equipment in the market today supports both bit and bit WEP encryption, but you might have older equipment that only supports bit WEP. All Belkin wireless products will support both bit and bit WEP.
Encryption Keys After selecting either the bit or bit WEP encryption mode, it is critical that you generate an encryption key. If the encryption key is not consistent throughout the entire wireless network, your wireless networking devices will be unable to communicate with one another on your network and you will not be able to successfully communicate within your network.
For bit WEP, you need to enter 10 hex characters. For bit WEP, you need to enter 26 hex characters. Shortly after the technology was introduced, researchers found that bit encryption was too easy to decode. Your router uses this passphrase to generate your WEP keys, but different hardware manufacturers might have different methods on generating the keys. A network key is basically a password that is between eight and 63 characters long.
It can be a combination of letters, numbers, or characters. Each client uses the same network key to access the network. Typically, this is the mode that will be used in a home environment. WPA with radius server is a system where a radius server distributes the network key to the clients automatically.
This is typically found in a business environment. For a list of Belkin wireless products that support WPA, please visit our website at www. You will use this key to program the encryption settings on your router and your wireless computers. Apple AirPort 2 products can support bit or bit encryption. Please verify which version you are using. If you cannot configure your network with bit encryption, try bit encryption. Encryption in the router is now set.
Each of your computers on your wireless network will now need to be configured with the same security settings. WARNING: If you are configuring the wireless router or access point from a computer with a wireless client, you will need to ensure that security is turned ON for this wireless client.
If this is not done, you will lose your wireless connection. To configure encryption for your Mac computer, set the encryption using the manual method described in the next section. By default, wireless security is disabled. To enable security, you must first determine which standard you want to use. This patch works only with the Windows XP operating system. Other operating systems are not supported at this time.
A pre-shared key is a password that is between eight and 63 characters long. It can be a combination of letters, numbers, and other characters. Each client uses the same key to access the network. Typically, this mode will be used in a home environment. WPA with radius server is a configuration in which a radius server distributes the keys to the clients automatically. This is typically used in a business environment. This setting will have to be identical on the clients that you set up.
Enter your pre-shared key. This can be from eight to 63 characters 4. You must now set all clients to match these settings. This same key must be used on all of the clients that you set up. This can be from eight to 63 characters and can be letters, numbers, or symbols. If you wish to add a password for greater security, you can set a password here.
Write down your password and keep it in a safe place, as you will need it in order to log into the Adapter in the future. We recommend that you back up your settings before you restore all of the defaults. The following message will appear. Restoring the defaults includes restarting the Adapter.
It can take up to 60 seconds. It is important not to turn the power off on the Adapter during the restart. A second countdown will appear on the screen. The Adapter home page should appear automatically. Save Current Settings You can save your current configuration by using this feature. Saving your configuration allows you to restore it later if your settings are lost or changed.
We recommend that you back up your current configuration before performing a firmware update. A window will open in which you can select the location where you want to save the configuration file. Select a location. Be sure to name the file so you can locate it yourself later. When the save is complete, you will see the window below.
The configuration is now saved! A window will open that allows you to select the location of the configuration file. Locate the configuration file you want to restore and double-click on it.
You will be asked if you want to continue. A reminder window will appear. It will take up to 30 seconds for the configuration restoration to complete. Firmware updates contain feature improvements and fixes, if any. When you click the button, a new browser window will appear informing you that either no new firmware is available or that there is a new version available. If a new version is available, you will have the option to download it.
A window will open that allows you to select the location where you want to save the firmware file. You can name the file anything you want, or use the default name. Be sure to locate the file in a place where you can locate it yourself later.
When the save is complete, you will see the following window. A window will open that allows you to select the location of the firmware update file. Browse to the firmware file you downloaded. Select the file by double-clicking on the file name.
You will be asked if you are sure you want to continue. This message tells you that the Adapter may not respond for as long as one minute as the firmware is loaded and the Adapter is rebooted. When the countdown reaches zero, the Adapter firmware update will be complete. Check your physical connections.
If the LED indicators do not light, the Adapter may not be connected properly. Solution: Verify that the Adapter is plugged into a power source. Check to see that the cables are connected to the correct ports and that they are secure.
Solution: If you are unable to connect to the Internet, please check the following items: 1. Look at the lights on your router. If the network has security encryption enabled, you will need to enter the network key. Temporarily move the Adapter, if possible, from five to 10 feet away from the router. If the correct network name does not appear, or if no network name appears, your network could be hidden.
Follow the security-setup instructions in this manual. Troubleshooting Problem: My wireless network performance is inconsistent.
Data transfer is sometimes slow. Signal strength is poor. Solution: Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation metal is generally the worst culprit are obstructions such as walls and metal appliances.
As a result, the typical indoor range of your wireless devices will be between to feet. Note also that connection speed may decrease as you move farther from the router or access point.
In order to determine if wireless issues are related to range, we suggest temporarily moving the computer, if possible, from five to 10 feet away from the router. Changing the wireless channel - Depending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability.
The default channel the router is shipped with is channel 11; you may choose from several other channels depending on your region.
0コメント